Linkage

The Three-Point Hitch System

Quality forged top links available in Category 0, 1, 1 & 2 combination, 2 and 3. All top links are yellow zinc plated unless otherwise specified. The ends are clear zinc plated.

The Three-Point Hitch System

The basic function of the system is the attachment and adjustment of agricultural implements. The three primary parts of the system are the top link and two lower lift arms as shown in Illustration A. Top link pins and draw pins (lift arm pins) are used to fasten the implement at these three points. Adjustment of one or all of these components allows the tractor operator to raise, lower or tilt an implement.

Top Link Repair Ends

Forged screw-in repair ends for Category 0, 1, 2 and 3 top links. Clear zinc plated

Top Link Ball Sockets

Weld-on top link ball sockets to fit Category 0 through Category 3 tractors. Available in black oxide and yellow zinc dichromate plated.

Lift Arm Ball Sockets

Weld-on lift arm ball sockets to fit Category 0 through Category 3 tractors. Available in black oxide and yellow zinc dichromate plated.

Forged Weld-on Ball Ends

Weld-on top link ball sockets to fit Category 0 through Category 3 tractors. Available in black oxide and yellow zinc dichromate plated.

Top Link & Lift Arm Replacement Balls

Top link and lift arm balls for ford, John Deere, Oliver and other tractors. Designed to replace original balls. Yellow zinc dichromate plated.

Top Link Reducer Bushings

Used in the pin hole of a top link to allow a smaller category pin to fit. Yellow zinc dichromate plated.

Lift Arm Reducer Bushings

Used in the pin hole of a top link to allow a smaller category pin to fit. Yellow zinc dichromate plated.

Drawbars

One piece 3-point hitch cross drawbars to fit Category 0 through Category 3 tractors.

Check Chain Clevis

Lift Arms & Lift Arm Parts

Category 1 lift arms and Category 1, 2 and 3 lift arm repair ends.

Stabilizer Pins

Stablizer stub pins for SpeedCo, Ford, Ferguson and other stablizer kits, Yellow zinc dichormate plated.

Stabilizer Arms, Brackets and Chains

Replacement stabilizer arms for PBH stabilizer kits and a variety of tractors. Stabilizer arms increase the stability of the tractor lift arms. Stay straps for Category 1 tractors are used to maintain an implement at a set height.

Draw Pins ( Lift Arm Pins )

Forged and adjustable Category 0 through 3 draw pins for a variety of applications. All pins are yellow zinc dichromate plated.

Clevis Type Draw Pins

For use with implements with yoke type mountings. All pins are yellow zinc dichromate plated.

Top Link Pins

Sizes and category 0 through 3 tractors. Yellow zinc dichromate plated.

Hitch Pins ( Clevis Pins )

An economy hitch pin ( clevis pin ) for numerous applications. Yellow zinc dichromate plated.

Fixed Handle Hitch Pins

Sizes and category 0 through 3 tractors. Yellow zinc dichromate plated.

Swivel Handle Forged Hitch Pins

Forged head hitch pin with swivel handle and zinc plated “R” clip pin. More than 25% stronger than Grade 2. Yellow zinc dichromate plated.

Forged Hitch Pins with Chain

Forged head swivel handle hitch pin with chain and 1/4″ lynch pin. Yellow zinc dichromate plated.

Grey Head Forged Hitch Pins

Designed for today’s demanding applications, these one piece, grade 8 performance, forged hitch pins are made from high strength steel and heat treated. Pin has black powder coating with a grey vinyl coated head and handle. Zinc plated “R” clip pin included.

Blue Head Hitch Pins

Our premium, heat treated, grade 8 performance hitch pin made from alloy steel is designed for the toughest applications. Pin has black powder coating with a blue vinyl coated head and handle. Zinc plated”R” clip pin included.

Red Head Hitch Pins

Designed for today’s demanding applications, these one piece, grade 5 performance, forged hitch pins are made from high strength steel and heat treated. Pin has black powder coating with a red vinyl coated head and handle. Zinc plated “R” clip pin included.

Forged Hitch Pins with Chain

Spring steel wire fits in the groove on the pin to secure it. Yellow zinc dichromate plated.

Handle-Lock Hitch Pins

Spring steel wire holds pin in place. Grooved pin to secure wire. Clear zinc finish. High carbon steel pin.

Double Lock Hitch Pins

These grade 5 performance hitch pins are designed with a quick release handle to allow for easy removal, and a double lock mechanism to ensure the pin remains in place. The pin and handle are powder coated with zinc plated locks.

Drop Forged Hitch Pins

One piece, drop-forged, grade 5 performance hitch pins are made from high strength steel and heat treated. Zinc plated “R” clip pin included. Yellow zinc dichromate plated.

Premium Hitch Pins

One piece zinc plated forged pin made of high carbon steel and heat treated to Grade 5 performance for the toughest applications. Spring wire swivel handle. “R” clip pin included. Meets or exceeds OEM specifications.

Bent Hitch Pins

These pins have numerous farm, lawn and garden and industrial applications. Complete with zinc plated “R” clip pin. Yellow zinc dichromate plated.

Universal Clevis Pins

Can be used as an adjustable replacement pin. Multiple holes allow user to cut off excess length. Yellow zinc dichromate plated.

Lynch Pins

Fasteners for numerous farm and other applications. Yellow zinc dichromate plated except for the PTL7091300 and PTL7091400 which have a black powder coated finish.

“R” Clip Pins

Available in the most popular sizes for farm and other applications.Yellow zinc dichromate plated spring wire.

Contact Us

HAPPY TO ANSWER YOUR QUESTIONS

Contact us for all your Product Related Queries Today.

Contact

hello@pbh.com

support@pbh.com